This is a mechanical (not regulated) mod, intended for use by experienced vapers, and requires regular maintenance.
How to use it
1. Remove bottle and battery (leave RDA on the mod)
2. Carefully remove the c-clamp by gripping it with pliers or tweezers
3. C-clamp is removed
4. Unscrew RDA
5. Push the electrode up and out of the hole
6. Electrode is removed
7. Wipe the electrode as best as possible (some wear will most likely be visible)
8. Roll paper towel as thin as possible
9. Insert the rolled end of the paper towel through the hole. Pull with pliers or tweezers to get it as snug as possible without getting it stuck
10. Remove the paper towel. (You can see the dirt that came off of mine, and that's only after 3 days of use since the last time I cleaned it)
11. Put the electrode back in place. Can take a little of a push until you feel it fully secure back in. Just be careful and don't use too much force
12. Screw RDA back on
13. Position the c-clamp with pliers or tweezers
14. Snap it into place by just pushing down on it with the flat tips of the tweezers or pliers (as shown in the picture) for instructions on properly maintaining your dotSquonk.
Improper use, transport, or storage may cause fire or explosion. The operational range of the resistance is from 0.1 ohm to 3.0 ohm. Do not build below 0.1-ohm resistance. Use at your own risk and take appropriate precautions when using this device. This product is for advanced users only.***
The dotSquonk that you can afford. With so many squonk boxes on the market, we wanted to do the squonk right. And part of being right is being in a price range that everyday advanced users can afford.
Two ways to play. Refill your bottle by removing it or if you're in a hurry you can top fill using your unicorn-style bottle, through your dotRDA24 squonk pin. You decide.
The perfect marriage. the dotSquonk brings out added features when utilized with the dotRDA24. And with an upgraded center 510 pin (which is also removable) made of 24k gold plated brass, this is a mechanical mod with even better pull than our tube mods.
Specifications:
Height：82mm
length：49mm
width：28mm
capacity：8ml
temperature control：NI/TI/SS
Battery：1*20700（not included）
Power：100w
Coil：0.08~3.0ohms
Package list:
1x dotSquonk 100w
1x silicon gel bottle
1x 18650 to 20700 battery adapter
1x Certificate of authenticity
Order Tips:
510 thread.
No battery included
You can select the e-juice, Wire, Wick & Tool in buyecigkits.
Guarantee:
Please review our guarantee policy.
Payment:
1) Please email to
sales to pay via PayPal.
2) Please Remark your requested colors, right address, city, state（province） telephone, etc. in the order or send us a message to
sales.
Warranty:
If you encounter any issues with your order, please contact us before opening a dispute. We will send you a free replacement after confirming the problem.
For a full refund, please return the item(s) to us in its original packaging and provide us with the shipping tracking number. Once we receive the package, we will issue a full refund.
Shipping from China:
Epacket: Delivery takes 15-25 days in the EU and USA, and 20-35 days in Russia.
Netherlands Post: Delivery takes about 20 days in the EU, 25-35 days in Asia, and approximately 60 days in South America or Africa.
Feedback:
We specialize in electronic cigarettes and e-hookah products, and our main goal is 100% customer satisfaction. Therefore, your feedback is crucial to us.
If you are satisfied with your purchase, please leave us a 5-star review. If you have any concerns, please contact us before leaving a review so we can address the issue in a timely manner.
